
With the colder and wetter months setting in, it's a good time to give your outdoor kit a bit of attention. If you've got a Fjällräven jacket or pair of trousers made from G-1000 fabric, a little Greenland Wax can make a big difference.
Waxing is a simple way to look after your gear and get a bit more out of it. It helps improve the fabric's resistance to wind and rain also it adds durability. It's something you can easily do yourself at home or if you would prefer bring it in store and we can do it for you.
Greenland Wax is a solid block made from a mixture of beeswax and paraffin. It's designed to work with Fjällräven's G-1000 fabric, a hardwearing blend of polyester and cotton used across many of their jackets, trousers and bags.
Most G-1000 garments come pre-waxed, but with regular wear and washing the wax gradually wears away. Giving it a fresh coat helps bring back some of that weather resistance.
It's worth remembering that waxing makes the fabric water-resistant, not waterproof. It's a handy bit of extra protection when you're out in the elements.
The good news is that it's pretty straightforward. All you need is a block of Greenland Wax and an iron.
1. Apply the wax
Lay your garment out flat and rub the block of Greenland Wax over the fabric using long, even strokes. You're looking to leave a thin, even layer across the areas you want to treat.
2. Add a little heat
Using an iron on a low temperature, without steam, gently heat the fabric (we use a ski iron as it doesn't have steam but any iron will do just turn off the steam setting.) This melts the wax into the material. You can also use a hairdryer if you prefer, its just a slightly slower process. Keep the heat moving and work your way across the garment.
3. Give it another coat on key areas.
One layer will do the job, but you can repeat the process on areas that take a bit more wear or are more exposed to the weather. Think shoulders, elbows, knees and the seat of your trousers.
And that's pretty much it. Your garment is ready for its next outing.

One of the best things about G-1000 is how adaptable it is. Adding more wax gives you extra wind and water resistance, while washing some of it out makes the fabric softer and more breathable when the weather warms up.
Just remember that Greenland Wax is only suitable for G-1000 fabric, so always check the label before getting started. Some Fjällräven garments combine different materials, so take care around any stretch panels or other fabrics.
A little time spent looking after your kit can go a long way. Give your old favourites some attention and they'll be ready for plenty more days outside.
If you'd rather leave it to us, we're happy to wax any Fjällräven G-1000 item purchased from The Brokedown Palace, completely free of charge. Just bring your item into the shop along with your proof of purchase.
Bought your Fjällräven elsewhere? No problem. We also offer a waxing service for items not purchased from us. Prices vary depending on the garment, so pop in and we'll be happy to take a look.